Announcement

Collapse
No announcement yet.

Gauntlet 2 Print head problem, all air machine

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gauntlet 2 Print head problem, all air machine

    After the flood stroke moves forward, there is a air leak towards the center of the press and the print stroke will not start. You can push the squeegee back by hand. To remedy the problem you must completely close the squeegee and flood speed valves then slowly open the squeegee valve. The print stroke will slowly begin to move. Once moving on its own the print and flood stroke are adjusted to normal and it works as designed. This usually happens after lunch break and sometimes first thing in the morning but more common starting back up after lunch.
    Ink Spot
    San Luis Obispo, CA 93401
    inkspotslo@sbcglobal.net
Working...
X